Commodity hardware  ·  AI software  ·  $15/mo

Your sensors.
Your outlets.
Smarter software.

Buy a Govee sensor ($12) and a Kasa outlet ($8) on Amazon. TentPilot's AI ties your hardware together — VPD tracking, automated feeds, smart alerts, and control from anywhere. Works with 10+ brands. No proprietary hardware required.

Free during beta — $15/mo Pro after launch. No lock-in, no proprietary hardware.

Works with your existing hardware

G Govee K Kasa IB Inkbird EW Ecowitt Ra Rachio TP Tapo TU Tuya BL Bluelab DF DFRobot
G Govee K Kasa IB Inkbird EW Ecowitt Ra Rachio TP Tapo TU Tuya BL Bluelab DF DFRobot
Stop paying the cannabis tax

You bring the hardware.
We bring them together.

Most grow control packages run $50–60/month and lock you into proprietary hardware that costs $500+. TentPilot is $15/mo and works with sensors and outlets you already own — or can grab on Amazon for a fraction of the cost.

Proprietary controllers
$339+
Pulse Pro, before sensors or outlets
  • ✗ Locked to one brand's hardware
  • ✗ No AI — just threshold alerts
  • ✗ Replace everything to switch
  • ✗ $200+ for the controller alone
  • ✗ Separate app per device brand
vs
TentPilot + Amazon hardware
~$45
Full starter kit + $15/mo for Pro
  • ✓ Works with 10+ brands
  • ✓ AI trend analysis & grow advice
  • ✓ Swap any device, keep your data
  • ✓ Govee sensor: $12. Kasa plug: $8
  • ✓ One dashboard for everything
Your Command Center

Everything in one place

Real-time VPD, temperature, humidity — alongside device controls, irrigation schedules, and AI-powered advice. This is what your grow room dashboard looks like.

Environment Controller

VPD-focused controls

Real-time Vapor Pressure Deficit calculated from your temp and humidity sensors, with target zones for each growth stage. Most grow apps don't even show VPD.

Device Control

One dashboard, every device

Govee sensors, Kasa outlets, Inkbird controllers — all in one view. See cause and effect in real time. Heater kicks on, temperature responds.

AI Grow Advisor

An experienced grower that never sleeps

Ask questions in plain English. Get specific, actionable advice based on your actual environment data. Apply recommendations with one click.

Irrigation Intelligence

VPD-aware feed scheduling

Visual timeline of every feed. The AI analyzes your environment and suggests adjustments — then tracks whether the change actually worked. No competitor does this.

Fertigation

Mix your nutrients with precision

Pick a recipe for your growth stage, enter your water volume, and TentPilot calculates every nutrient dose. One click fires your peristaltic pumps for the exact duration.

Grow Room Preferences

Dialed in for every stage

Temperature targets, light schedules, irrigation recipes — all configurable per growth stage. Switch from Veg to Flower and everything updates automatically.

The 3am Save

The alert that paid for itself

The dehumidifier was "running." Humidity was climbing. A dumb alert system would have stayed silent. TentPilot saw the trajectory and sent a WhatsApp at 3:07 AM.

Multi-Room Management

Every room, one platform

Flower tent, veg room, drying room — each with its own device roles, temperature targets, light cycle, and irrigation schedule. Switch between rooms or monitor them all from one place.

Device Management

Your hardware, managed from one place

See every connected device, its status, and battery life. Add new devices with automatic network discovery — Kasa outlets are found in seconds, no credentials needed.

Hardware Gateway

Connect any device — BLE, LAN, or WiFi

TentPilot Scout bridges local devices to the cloud. Install it on your Mac or Pi, and it discovers Govee sensors over Bluetooth and Kasa outlets over LAN — no credentials needed.

Learn about Scout & the Hub →
Control from anywhere

Text your grow room

Message the AI over SMS, WhatsApp, or Telegram — in plain English. Ask questions, request changes, and approve actions without ever opening the app.

Ask anything — "What's my VPD?" "When's the next feed?"
Request changes — "Decrease irrigation 10% at peak"
Nothing happens without your say — explicit approval required
SMS WhatsApp Telegram
app.tentpilot.com/dashboard
See it in action

Try the live demo

Explore a live flower room in week 5 — real environment data, completed irrigation schedule, and fertigation dose log. No signup required.

View Live Demo Browse Compatible Devices
Built by a grower

Not a hardware company's afterthought

"
I got tired of flying blind between checks. So I wired up 10 Govee sensors, an Inkbird thermostat, a humidity controller, and a Raspberry Pi — and started logging everything. A year of data later, I built the monitoring system I wished existed. TentPilot catches the problems I used to sleep through.
SL
Spencer
Grower & Founder · Texas
10
Sensors running 24/7
86K+
Readings per month
1+ yr
Live production data
$225
Total hardware cost

Stop overpaying for
underpowered hardware

Your sensors. Your outlets. Software that's actually smart. Get early access.